View CY3600I_291731.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CY3600I
FLASH370iTM ISRTM Programming Kit
Features
* Supports FLASH370iTM and Ultra37000TM devices (for Ultra37000V 3.3V support, please see the Ultra37000 ISRTM Programming Kit data sheet, CY3700i) * Jam programming language support for Ultra37000 devices * Standard JTAG programming interface * Multi-device programming * Supports cascading of devices * Easy to use Windows 95TM, Windows 98TM, and Windows NTTM 4.0 compatible interface * Eliminates programming insertion to improve manufacturing efficiency * For programming in the lab, on the manufacturing floor, or at remote sites * ATE support via Jam on industry leading ATE platforms ISR programming cable connects to the parallel port of a PC into a standard 10-pin male connector mounted on the user's board. ISR Programming Software The ISR software provides an easy to use Graphical User Interface that accepts JEDEC files as input. The JEDEC files are used in ISR programming for FLASH370i CPLDs. JEDEC files are also used to compose platform and device independent Jam files. Jam files are used in ISR programming for Ultra37000 CPLDs. The ISR software reads in a simple user-defined configuration file that dictates how many devices are in the daisy chain and what operation is to be done on each Cypress device. The same chain can be used with other JTAG compliant devices. The ISR User's Guide (in the CD-ROM documentation) describes the operation of the ISR software. The application notes included with the kit describe the Ultra37000 and FLASH370i architectures and system design considerations for programming with the FLASH370i ISR Programming Kit. 10-pin ISR Connector The diagram below shows the pinout of the 10-pin male connector to be mounted onto the board. The view looking down onto the board is shown below. SDO GND VCC NC ISR [1] SDI ISRVPP SCLK GND[2] SMODE
Kit Contents
* ISR (In-System ReprogrammableTM) Programming Cable for use with FLASH370i and Ultra37000 devices * ISR Programming Software Release 2.2 * ISR Application Notes
Functional Description
The ISR programming kit enables users to program FLASH370i and Ultra37000 CPLDs on board with our ISR Programming Kit, ISR programming cable, and a personal computer. The
ISR PC Cable Programming
V CC 6' 1' Interface Box Ultra 37000 device 25-pin cable
PC
Parallel Port
F LASH370i device Designer's Board 10 Pin ISR connector
Notes: 1. Refer to the CD-ROM ISR User's Guide documentation for detailed information on ISR programming and electrical specification requirements. 2. Pin1 Connection.
Cypress Semiconductor Corporation
*
3901 North First Street
*
San Jose
*
CA 95134
*
408-943-2600 July 28, 1999
CY3600I
Table 1. FLASH370i Pin Description. Pin ISRVPP ISR* VCC SDO SMODE SCLK SDI NC GND Type OUTPUT OUTPUT INPUT INPUT OUTPUT OUTPUT OUTPUT NC -- Description In System Reprogramming high-voltage programming pin. In System Reprogramming enable indicator (active LOW). +5V supply voltage provided from the target system to the cable. Serial Data Output Receiver. The SDO output pin of the last device in the ISR chain of the system is connected to this input pin. Serial Mode Control. This is the mode select control input for the TAP controller state machine contained in the ISR interface. Serial Clock. ISR interface clock input. Serial Data Input Driver. This output pin is connected to the SDI input of the first device in the ISR chain. No Connect. Zero volt common ground for PC and target system.
Table 1 describes the function of each of these pins on the ISR programming cable. An OUTPUT is provided by the PC and an INPUT is provided by the target system. The dimensions of the male connector required in the system are given below: Male Connector: * 2 x 5 = 2 rows, 5 pins per row * Measuring from center of the pins, each pin is 0.1" from the others. * Pin Length is 0.23" * Pin cross-section is 0.025" x 0.025" Part Number: * Digi-Key(R) S2012-05-ND (straight-pin connector) * Digi-Key S2112-05-ND (right-angle connector)
PC System Requirements
* * * * * One free parallel port 486 / 66MHz PC or better Windows 95/98/NT 16 MB of RAM 1MB or more disk space
Ordering Information
Product Code CY3600I Document #: 38-00733-C Description ISR Programming Kit
ISR, Ultra37000, and FLASH370i are trademarks of Cypress Semiconductor Corporation. Windows 95, Windows 98, and Windows NT are trademarks of Microsoft Corporation. Digi-Key is a registered trademark of Digi-Key Corporation.
(c) Cypress Semiconductor Corporation, 1999. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress Semiconductor product. Nor does it convey or imply any license under patent or other rights. Cypress Semiconductor does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress Semiconductor products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress Semiconductor against all charges.

▲Up To Search▲

Price & Availability of CY3600I

	To Download CY3600I Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .